Hefei cini intelligent technology co., ltd.

Solution for high pressure central water outlet filter device of numerical control machine

It is used to solve the complex structure of the existing liquid filter device and can only be filtered once, which can easily lead to slow filtration speed and poor filtration effect. Specifically, the high-pressure filter device for the central water outlet of the numerical control machine tool, including the worktable, outer frame and inlet tube, the outer frame is set at the upper position of the worktable, the upper end of the inlet tube is connected with the external liquid recovery device, and its lower end runs through the inner part of the outer frame. A separator is set in the inner part of the outer frame near the middle and lower segment, and a filter mechanism is set at the upper end of the separator. By setting up the filter mechanism one, the cooling fluid can be preliminarily filtered effectively, the precipitated metal fragments can be brought up again, the cooling fluid filtration and discharge speed can be accelerated, and the filter efficiency can be effectively improved. Then, by combining the filter mechanism two with the filter mechanism, the filter effect of fragments impurities can be further improved and the purity of the cooling fluid can be improved.

Solution for high pressure center outlet filter cooling device

The high-pressure center water outlet filter cooling device includes a filter mechanism, a cooling mechanism, a refrigeration tank, a sterilizing mechanism, a water pump 1 and a water pump 2. By setting up a filter mechanism, on the basis that the rinsed hot water enters into the treatment box and is filtered by the filter plate, the output shaft of the motor drives the spiral blade to rotate, thus the hot water passing through the curved filter plate is stirred axially, which enables the filtered impurities in the filter plate to gather together toward the direction near the roller under the centripetal force generated during the rotation of the roller. This prevents a lot of impurities from attaching to the surface of the filter plate and causing blockage. In the process, by setting a cleaning brush on the surface of the helical blade, the surface of the cleaning plate can be cleaned during the roll process, preventing some impurities from attaching to its surface due to the water flow impact, and reducing the cleaning frequency.

Solution of Waste Cleaning Device for NC Machine Tool

Waste cleaning device for numerical control machine tools, including a worktable, with diaphragms symmetrically mounted on both sides of the top of the worktable, and a worktable mounted on the top of the worktable; First fix the worktable on the NC machine by slider, then push the waste generated by the NC machine into the waste collection box by brush. The metal debris and a small part of the waste that could not be cleaned up are shaken into the waste collection box by the shaking drive. The setting of slider with the shaking wheel nut makes the waste cleaning device more applicable overall, making it easy to fix the waste collection device to the different size of the NC machine, and then double waste cleaning. Cleaning up is more efficient, the shaking drive uses the mode of large left and right shaking range, small up and down shaking range, high overall frequency, shaking and moving metal debris and a small part of waste, will not cause metal debris to rise, and will be cleaner.

Solution of cooling liquid recycling device for numerical control machine

The cooling fluid recovery device for numerical control machine tools refers to the technical field of cooling fluid recovery, including the first box and the second box. One side of the first box is fixed with the second box by spot welding, the top of the second box is fixed with a water pump by bolts, and the second box is fixed with a stop box by bolts. First, the cooling fluid mixture from the waste bin at the bottom of the NC machine is pumped into the shield box through the suction tube on the second box and the circular floating plate on the suction tube. The circular floating plate on the suction tube enables the liquid extracted by the whole pump to be located on the top of the mixing liquid, and the mixing liquid impurities on the top are small. At the same time, the first and second sieve installed on the circular floating plate and the suction tube can intercept the large particle impurities very well. Avoid pumping mixed liquids, a large amount of metal impurities are doped in the mixed liquids, causing serious wear and tear of the metal blades of the pump.

Wechat scan

Company profile：

Hefei Koni Intelligent Technology Co., Ltd. is located in the famous science and education city of Anhui Province-Hefei, China. It mainly provides R&D and sales services of complete accessories for various industries, such as machine tool accessories, machine tool sheet metal, machine tool chip remover, machine tool filtration, machine tool water tank, industrial equipment, industrial environmental protection, etc.
On the basis of absorbing the advanced technology and technology at home and abroad, the company, with its own advantages, integrates external resources, optimizes internal management, continuously develops and innovates, and strides forward in the direction of business diversification and business diversification. Hope to provide you with better service with our excellent equipment and professional technology!

Contact details：

Contact details17718172522
Company address:Shushan District, Hefei City, Anhui Province
Postal Code:230000
E-mail：hfzhengfei@163.com

在线客服

Telephone：17718172522

Cell phone：17718172522

Mail：hfzhengfei@163.com

Wechat：17718172522